A.K.S LUXE BEAUTÈ CO.

Erline "Linnee" Applying Lashes 101

Posted on January 04 2017

Video Demo of Lash application

STEP 1: CAREFULLY REMOVE YOUR AKS LUXE LASHES FROM THE PLASTIC TRAY WITH TWEEZERS. HOLD LASHES AT ONE OF THE OUTER ENDS OF THE LASH BAND TO PREVENT DAMAGE TO THE LASHES.

TIP: ALWAYS APPLY YOUR  LASHES ONCE MAKEUP IS COMPLETED.

MAKE SURE TO CURL AND APPLY MASCARA TO YOUR NATURAL LASHES, BEFORE APPLYING AKS LUXE LASHES.

STEP 2:

MEASURE BEFORE APPLYING GLUE, HOLD ONE AKS LUXE LASHES STRIP UP TO YOUR EYE TO SEE IF THE SIZE FITS. YOU WANT THE LASH BAND TO BE SLIGHTLY SHORTER THAN YOUR NATURAL LASH LINE, TO PREVENT THE LASH BAND FROM POKING THE INNER CORNER OF THE EYE.

STEP 3:

TRIM IF NECESSARY, TRIM YOUR AKS LUXE LASHES FROM THE OUTER ENDS, LASH BY LASH (THE ENDS CLOSEST TO YOUR EARS). LASHES SHOULD BE LONGER TOWARDS THE OUTER CORNER, NOT THE INNER CORNER OF THE EYE.

STEP 4:

APPLY LASH GLUE/ADHESIVE ONTO YOUR MINK LASH BAND AND RUN IT FROM THE INNER TO THE OUTER BAND. PAY SPECIAL ATTENTION TO BOTH ENDS OF THE LASH BAND TO ENSURE BETTER HOLD. THEN, BEND THE LASH BAND INTO A HORSESHOE SHAPE FOR 30 SECONDS WHILE THE GLUE BECOMES TACKY.

 STEP 5:

APPLY LASH! LOOK DOWN AND PLACE THE CENTER OF THE MINK LASH AS CLOSE TO YOUR NATURAL LASH LINE AS POSSIBLE. GENTLY TAP DOWN EACH SIDE WITH YOUR TWEEZERS. PRESS FROM END TO END AND ALLOW THE GLUE TO SET.

More Posts

Next Post

Search our store